A common planning figure for a high-temperature dryer is about 0.02 gallons of propane per wet bushel per point of moisture removed, plus a little electricity (University of Minnesota and NDSU). Iowa State’s energy factor is similar, about 0.018 gallons, with a published range of 0.010 to 0.025 depending on the dryer.

A worked example

Drying 10,000 bushels from 21% to 16% is 5 points: 0.02 × 10,000 × 5 = 1,000 gallons of propane. At $2.00/gal that is $2,000, or $0.20 per bushel, plus electricity. The drying cost calculator applies your propane and power prices and shows cost per point.

Dryers with heat reclaim, vacuum cooling, or dryeration can use less. In-bin and low-temperature systems are a different energy picture. Ownership, labor, and repairs are on top of the fuel, as Iowa State A2-31 notes.