Enter the wet grain as

Default target is a common base for corn (shelled) (15.5%). Storage: 15.5% for winter storage; 13–14% to hold into the next summer (NDSU).

Dry matter lost to fines, broken kernels and respiration. Drying tables use 0.5%; Iowa State measured 0.22–1.71% on farms.

Compare a buyer's shrink factor

Many elevators use 1.2–1.5% per point. Purdue considers more than 1% hidden handling loss excessive.

Dry bushels at 15.5%

9,180.8 bu

Total shrink 8.19% for 6.5 points removed: 1.260% per point (water shrink alone is 1.183% per point).

Wet weight560,000 lb · 10,000.0 wet bu
Water removed (7.69%)−43,077 lb
Handling loss (0.50%)−2,800 lb
Dry weight514,123 lb · 9,180.8 bu
Buyer at 1.40%/point: 9,090.0 bu (9.10% shrink). That includes 1.41% handling loss, more than the 1% Purdue calls reasonable. Difference vs. your estimate: 90.8 bu.

Formula: dry weight = wet × (100 − harvest%) ÷ (100 − target%) − handling loss. How shrink works

How moisture shrink is calculated

Drying removes water but leaves the dry matter. So the dry weight is the wet weight times the share of dry matter before drying, divided by the share after:

dry weight = wet weight × (100 − harvest moisture) ÷ (100 − target moisture)

That works out to 1.183% of the weight for every point removed when drying to 15.5%, 1.176% to 15%, and 1.149% to 13% (Purdue NCH-61). On top of the water, some dry matter is lost to fines, broken kernels and respiration. That's handling loss. Drying tables add 0.5% of the wet weight; Iowa State measured 0.22–1.71% on farms and 0.64–1.33% at commercial dryers.

Example

10,000 wet bushels of 22% corn (560,000 lb) dried to 15.5%: 560,000 × 78 ÷ 84.5 = 516,923 lb after water, less 0.5% handling (2,800 lb) = 514,123 lb, or 9,181 bushels. Total shrink is 8.19%, which is 1.26% per point.

Buyer shrink factors

Elevators often "pencil shrink" with a constant factor, such as 1.3% or 1.4% per point. The part above the true water shrink is a handling charge. Purdue's rule of thumb: more than about 1% hidden handling loss is more than drying actually costs in dry matter. Open "Compare a buyer's shrink factor" above to see the hidden charge on your load. More on shrink factors.

Guides

Frequently asked questions

How is moisture shrink calculated?
Dry weight equals wet weight times (100 minus harvest moisture) divided by (100 minus target moisture). That is the water removed. Handling loss — often 0.5% of the wet weight — is then subtracted for total shrink.
What is a buyer’s shrink factor?
Elevators often take a flat percent per point of moisture, such as 1.3% or 1.4%. The part above true water shrink is a handling charge. Open “Compare a buyer’s shrink factor” in the calculator to see it on your load.
Does this replace my scale ticket?
No. These are planning estimates using university extension formulas. Your buyer’s scale ticket, discount schedule, and contract decide what you’re paid.

Other calculators

Sources

  1. Purdue Extension NCH-61: Calculating Grain Weight Shrinkage in Corn Due to Mechanical Drying (Hicks & Cloud)
  2. Iowa State University Extension, Ag Decision Maker A2-32: Grain Drying and Shrink (Edwards)

Estimates for planning. Your buyer's scale ticket, discount schedule and contract terms decide what you're paid. Methodology.

For silage and forage — bunker tons, packing, silage value and cattle shrink — see the sister site silageshrink.com.